Filter
Top Products
WALK-UP PHOTOCAPTURE CENTER
™
11 - 14
Changing the default settings
You can adjust the Print Quality, Print Size, Brightness, Contrast,
True2Life
®
and Scan to Card settings, that are shown in the chart.
These settings will remain set until you change them again.
Press Menu/Set, 4, followed by the number of the setting you want
to change. (See details on the following pages.)
Submenu Menu
Selections
Options (1) Options (2) Factory
Settings
1.PRINT
QUALITY
— NORMAL — FINE
FINE
PHOTO
2.PRINT SIZE — 5"
×
3.5" — 6"
×
4"
6"
×
4"
7"
×
5"
8"
×
10"
3.BRIGHTNESS —
- +
—
- +
- +
- +
- +
- +
4.CONTRAST —
- +
—
- +
- +
- +
- +
- +
5.TRUE2LIFE ON 1.WHITE BALANCE
- + (- +)
- +
- +
- +
- +
2.SHARPNESS
- + (- +)
- +
- +
- +
- +
3.COLOR DENSITY
- + (- +)
- +
- +
- +
- +
OFF ——OFF
6.SCAN TO CARD
(See Chapter 15)
—
PDF
— PDF
JPEG