Filter
Top Products
11 - 17 WALK-UP PHOTOCAPTURE CENTER
™
Understanding the Error Messages
Once you are familiar with the types of errors that can occur while
you’re using the PhotoCapture Center
™
, you can easily identify and
troubleshoot any difficulties.
When an error message appears on the LCD, the MFC will beep to
get your attention.
MEDIA ERROR
—
This message will appear if you insert a media card
that is either bad or not formatted, or when there is a problem with
the media drive, or if the DPOF print file on the media card tried to
select a .JPG image that is not there. To clear this error, take out the
media card.
NO FILE
—
This message will appear if you select
PHOTOCAPTURE
and the media card in the drive (slot) does not contain a .JPG file.
OUT OF MEMORY
—
This message will appear if you are working with
images that are too large for the MFC’s memory.
PhotoCapture Center
™
Requirements
To avoid error conditions, please remember:
■
The DPOF file on the media card must be in a valid format.
■
The image file extension must be .JPG (Other image file
extensions .JPEG, .TIF, .GIF and so on will not be recognized).
■
Walk-up PhotoCaputure Center
™
printing must be performed
separately from PhotoCapture Center
™
operations using the PC.
(Simultaneous operation is not available.)
When printing the INDEX or IMAGE, the PhotoCapture Center
™
will print all the valid images, even if one or more images has
been corrupted. A portion of the corrupted image may be printed.