Filter
Top Products
SETUP RECEIVE 5 - 11
■
The MFC will only answer calls to its registered number.
■
The first two rings are silent on the fax machine. This is because
the fax must «listen» to the ring pattern (to compare it to the
pattern that was ’registered’). (Other telephones on the same line
will ring.)
■
If you program the MFC properly, it will recognize the registered
ring pattern of the ’fax number’ within 2 ring patterns and then
answer with a fax tone. When the ’voice number’ is called, the
MFC will not answer.
Very important
When you set the Distinctive Ring feature to ON, the receive mode
is set to MANUAL
automatically.
MANUAL
mode will never pick up a
call by itself since it is <<Neutral>>. You can not change the receive
mode to the other mode while the Distinctive Ring is set to on.
Registering the Distinctive Ring pattern
1
Set the MFC to
MANUAL
mode.
2
Press Menu/Set, 2, 0.
3
Press or to select
SET?
.
Press Menu/Set.
4
Press or to select the stored ring pattern you want to
use.
Press Menu/Set.
(You will hear each pattern as you scroll through the four
patterns. Make sure you choose the pattern that the telephone
company gave you.)
5
Press Stop/Exit.
Distinctive Ring is now set to on.
Turning off the Distinctive Ring
1
Press Menu/Set, 2, 0.
2
Press or to select
OFF
.
Press Menu/Set.
3
Press Stop/Exit.