Filter
Top Products
vii
Safety Precautions
To Use the MFC Safely
WARNING
There are high voltage electrodes
inside the MFC. Before you
replace internal parts, clean the
MFC or clear a paper jam, make
sure you have unplugged the
power cord from the power outlet.
Do not handle the plug with wet
hands. Doing this might cause an
electrical shock.
To prevent injuries, be careful not
to put your hands on the edge of
the MFC under the scanner cover.
To prevent injuries, be careful not
to put your fingers in the area
shown in the illustration.
To prevent injuries, be careful not
to touch the edge of metallic part
shown in the illustration.
To prevent injuries, be careful not
to touch the area shaded in the
illustration.
To prevent injuries, be careful not
to touch the edge of the metallic
part shown in the illustration.