Filter
Top Products
INITIAL SETUP 4 - 6
Setting the Beeper Volume
You can set the beeper volume to LOW, MED, HIGH or OFF. The
default (original) setting is LOW. When the beeper is on, the MFC
beeps every time you press a key or make a mistake and when a fax
is being sent or received.
1
Press Menu/Set, 1, 5, 2.
2
Press or to select your option.
3
When the LCD shows the option you want.
Press Menu/Set.
4
Press Stop/Exit.
Setting the Speaker Volume
You can set the volume of the MFC’s one-way speaker.
1
Press Menu/Set, 1, 5, 3.
2
Press
or
to select
(
OFF
,
LOW
,
MED
, or
HIGH
).
Press Menu/Set.
3
Press Stop/Exit.
—
OR
—
If you are using Hook, you can adjust the speaker volume while you
are dialing. The default setting is the lowest volume.
Press
or
to adjust the volume level.
(Every time you press a key, the volume changes as the LCD shows
the active setting. The new setting will stay until you change it again.)
VOLUME
2.BEEPER
VOLUME
3.SPEAKER