Filter
Top Products
6 - 1 SETUP SEND
6
6
Setup Send
Before you begin
Before you can begin sending faxes, make sure you read all the instructions and
cautions listed for putting originals in the Automatic Document Feeder (ADF).
Sending faxes using multiple settings
When you send a fax you can choose any combination of these
settings: contrast, resolution, overseas mode, delayed fax timer,
polling transmission or real time transmission. After each setting is
accepted, the LCD will ask if you want to enter more settings:
Press 1 to select more settings. The LCD
will return to the
SETUP SEND
menu.
—
OR
—
Press 2 if you have finished choosing
settings and go to the next step.
Faxing from the automatic document feeder (ADF)
The ADF can hold up to 30 pages and feeds each sheet individually.
Use standard (20 lb or 75 g/m
2
) paper and always fan the pages
before putting them in the ADF.
Recommended environment
Temperature: 68° F - 86° F (20° C - 30° C)
Humidity: 50% - 70%
Paper: Xerox 4200 (20 lb LTR)
■
Make sure documents written with ink are completely dry.
■
Originals to be faxed must be from 5.8 to 8.5 inches wide and 5.8
to 14 inches long.
DO NOT use paper that is curled, wrinkled, folded, ripped,
stapled, paper clipped, pasted or taped.
DO NOT use cardboard, newspaper or fabric. (To fax this kind
of original, see Faxing from the scanner glass on page 6-4.)
OTHER SETTINGS?
1.YES 2.NO