Filter
Top Products
2-13
Cisco ONS 15327 Troubleshooting Guide, R3.4
March 2004
Chapter 2 Alarm Troubleshooting
Alarm Index by Alarm Type
2.3.1 Alarm Type/Object Definition
Table 2-7 defines abbreviations used in the alarm troubleshooting procedures.
STSTERM:: UNEQ-P, page 2-122
VT-MON:: AIS-V, page 2-17
VT-MON:: AUTOSW-AIS, page 2-25
VT-MON:: AUTOSW-LOP (VTMON), page 2-26
VT-MON:: AUTOSW-UNEQ (VTMON), page 2-28
VT-MON:: FAILTOSW-PATH, page 2-55
VT-MON:: FORCED-REQ, page 2-69
VT-MON:: LOCKOUT-REQ, page 2-77
VT-MON:: LOP-V, page 2-81
VT-MON:: MAN-REQ, page 2-88
VT-MON:: UNEQ-V, page 2-123
VT-MON:: WKSWPR, page 2-124
VT-MON:: WTR, page 2-124
VT-TERM:: AIS-V, page 2-17
VT-TERM:: PLM-V, page 2-96
VT-TERM:: RFI-V, page 2-102
VT-TERM:: SD-P, page 2-105
VT-TERM:: SF-P, page 2-107
VT-TERM:: UNEQ-V, page 2-123
Table 2-6 Alarm Index by Alarm Type (continued)
Table 2-7 Alarm Type/Object Definition
BITS Building integration timing supply (BITS) incoming references (BITS-1, BITS-2)
DS1 A DS-1 line on an XTC-14 or XTC-28-3 card
DS3 A DS-3 line on an XTC-28-3 card
ENV An environmental alarm port on an XTC card
EQPT A card in any of the 8 card slots. The EQPT object is used for alarms that refer to the
card itself and all other objects on the card including ports, lines, STS and VT
ETHER Ethernet, such as for straight-through (Category 5) LAN cables
EXTSYNCH BITS outgoing references (SYNC-BITS1, SYNC-BITS2)
FAN Fan-tray assembly
FUDC SONET F1 byte user data channel
HDGE High Density Gigabit Ethernet; applies to G1000-2 cards.
MSUDC SONET Multiplex Section User Data Channel
NE The entire network element