Filter
Top Products
Chapter 3 Setting Up the CiscoSecure ACS HTML Interface
Protocol Configuration Options for RADIUS
3-14
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version. 3.0
Setting Protocol Configuration Options for RADIUS (Cisco
IOS/PIX)
This procedure allows you to enable the Cisco IOS/PIX RADIUS VSA. Selecting
this attribute displays an entry field under User Setup and/or Group Setup in
which any TACACS+ commands can be entered to fully leverage TACACS+ in
a RADIUS environment.
Note If the Per-user TACACS+/RADIUS Attributes check box in Interface
Configuration: Advanced Options is selected, a User check box appears
alongside the Group check box for each attribute.
To set protocol configuration options for the Cisco RADIUS attribute follow
these steps:
Step 1 Click Interface Configuration.
Step 2 Click RADIUS (Cisco IOS/PIX).
Result: The RADIUS (Cisco IOS/PIX) page appears.
Step 3 Select the check box for either User or Group, or both, next to attribute number
26, the VSA for Cisco.
Step 4 Click Submit at the bottom of the page.
Result: According to your selections, the attribute for the Cisco RADIUS VSA
appears on the User Setup or Group Setup pages, or both, as a configurable option
with a field in which you can enter TACACS+ commands.
Setting Protocol Configuration Options for RADIUS (Ascend)
This procedure enables you to hide or display RADIUS (Ascend) attributes for
configuration from other portions of the Cisco Secure ACS HTML interface.