Filter
Top Products
Chapter 7 Setting Up and Managing User Accounts
Advanced User Authentication Settings
7-48
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Step 4 Do one of the following:
a. If you are finished configuring the user account options, click Submit to
record the options.
b. To continue to specify the user account options, perform other procedures in
this chapter, as applicable.
Setting BBSM RADIUS Parameters for a User
The BBSM RADIUS parameters appear only if all the following are true:
• A AAA client has been configured to use RADIUS (BBSM) in Network
Configuration.
• The Per-user TACACS+/RADIUS Attributes check box is selected under
Advanced Options in the Interface Configuration section.
• User-level RADIUS (BBSM) attributes you intend to apply have been
enabled under RADIUS (BBSM) in the Interface Configuration section.
BBSM RADIUS represents only the BBSM proprietary attributes. You must
configure both the IETF RADIUS and BBSM RADIUS attributes. Proprietary
attributes override IETF attributes.
Note To hide or display BBSM RADIUS attributes, see the “Setting Protocol
Configuration Options for RADIUS (Cisco BBSM)” section on page 3-20.
To configure and enable BBSM RADIUS attributes to be applied as an
authorization for the current user, follow these steps:
Step 1 Perform Steps 1 through 3 of the “Adding a Basic User Account” section on
page 7-5.
Result: The User Setup Edit page opens. The username being added or edited
appears at the top of the page.
Step 2 Before configuring BBSM RADIUS attributes, be sure your IETF RADIUS
attributes are configured properly. For more information about setting IETF
RADIUS attributes, see the “Setting IETF RADIUS Parameters for a User”
section on page 7-37.