Filter
Top Products
7-7
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Chapter 7 Setting Up and Managing User Accounts
Basic User Setup Options
Step 7 Do one of the following:
a. To finish configuring the user account options and establish the user account,
click Submit.
b. To continue to specify the user account options, perform other procedures in
this chapter, as applicable.
Tip For lengthy account configurations, you can click Submit before continuing.
This will prevent loss of information you have already entered if an unforeseen
problem occurs.
Setting Supplementary User Information
Supplementary User Information can contain up to five fields that you configure.
The default configuration comprises two fields: Real Name and Description.
For information about how to display and configure these optional fields, see the
“User Data Configuration Options” section on page 3-3.
To enter optional information into the Supplementary User Information table,
follow these steps:
Step 1 Perform Steps 1 through 3 of the “Adding a Basic User Account” section on
page 7-5.
Result: The User Setup Edit page opens. The username being added or edited
appears at the top of the page.
Step 2 Complete each box that appears in the Supplementary User Info table.
Step 3 Do one of the following:
a. If you are finished configuring the user account options, click Submit to
record the options.
b. To continue to specify the user account options, perform other procedures in
this chapter, as applicable.