Cisco Systems Servers Server User Manual


 
Appendix D RADIUS Attributes
IETF Dictionary of RADIUS AV Pairs
D-14
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
14 Login-IP-Host Host to which the user will connect when the Login-Service attribute is
included.
15 Login-Service Service that should be used to connect the user to the login host.
Service is indicated by a numeric value as follows:
0: Telnet
1: Rlogin
2: TCP-Clear
3: PortMaster
4: LAT
16 Login-TCP-Port TCP (Transmission Control Protocol) port with which the user is to be
connected when the Login-Service attribute is also present.
18 Reply-Message Text to be displayed to the user.
22 Framed-Route Routing information to be configured for the user on this AAA client.
The RADIUS RFC (Request for Comments) format (net/bits [router
[metric]]) and the old style dotted mask (net mask [router [metric]]) are
supported. If the router field is omitted or 0 (zero), the peer IP address
is used. Metrics are currently ignored.
24 State Allows State information to be maintained between the AAA client and
the RADIUS server. This attribute is applicable only to CHAP
challenges.
Table D-7 RADIUS (IETF) Attributes (continued)
No. Attribute Description