Filter
Top Products
Chapter 3 Setting Up the CiscoSecure ACS HTML Interface
Protocol Configuration Options for RADIUS
3-16
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version. 3.0
To set protocol configuration options for RADIUS (Cisco VPN 3000) attributes,
follow these steps:
Step 1 Click Interface Configuration.
Step 2 Click RADIUS (Cisco VPN 3000).
Result: The RADIUS (Cisco VPN 3000 Concentrator) edit page appears.
Step 3 Select the check box for either User or Group, or both, for each RADIUS (Cisco
VPN 3000) service you want to appear as a configurable option on the User Setup
or Group Setup page.
Note Each attribute selected must be supported by the Cisco VPN 3000
Concentrator RADIUS network devices.
Step 4 When you have finished selecting the attributes, click Submit at the bottom of the
page.
Setting Protocol Configuration Options for RADIUS
(Cisco VPN 5000)
This procedure enables you to hide or display RADIUS (Cisco VPN 5000
Concentrator) attributes for configuration from other portions of the
Cisco Secure ACS HTML interface.
The RADIUS (Cisco VPN 5000 Concentrator) page lists all the attributes
available for Cisco VPN 5000 Concentrator RADIUS.
Note If the Per-user TACACS+/RADIUS Attributes check box on the Advanced
Options page of Interface Configuration is selected, a User check box appears
alongside the Group check box for each attribute.