Filter
Top Products
Appendix G ODBC Import Definitions
Action Codes
G-20
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Action Codes for Modifying TACACS+ and RADIUS Group and
User Settings
Table G-5 on page G-21 lists the action codes for creating, modifying, and
deleting TACACS+ and RADIUS settings for Cisco Secure ACS groups and
users. In the event that Cisco Secure ACS has conflicting user and group settings,
user settings always override group settings.
Transactions using these codes affect the configuration displayed in the User
Setup and Group Setup sections of the HTML interface. For more information
about the User Setup section, see the “Setting Up and Managing User Accounts”
section on page 7-1. For more information about the Group Setup section, see the
“Setting Up and Managing User Groups” section on page 6-1.
151 SET_CALLBACK_NO UN|GN, V1 Set the callback number for this user or
group (TACACS+ and RADIUS). V1
should be one of the following:
Callback number—Literally, the phone
number the AAA client is to call back.
• none—No callback is allowed.
• roaming—The dial-up client
determines the callback number.
• as group—Use the callback string or
method defined by the group.
Table G-4 Action Codes for Initializing and Modifying Access Filters (continued)
Action
Code Name Required Description