Filter
Top Products
Chapter 8 Establishing Cisco Secure ACS System Configuration
Cisco Secure ACS Active Service Management
8-50
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
–
Custom actions—You can define other actions for Cisco Secure ACS to
take upon failure of the login process. Cisco Secure ACS can execute a
batch file or executable upon the failure of the login process. To make a
batch or executable file available in the on failure list, place the file in the
following directory:
drive
:\path\CSMon\Scripts
where drive is the local drive where you installed Cisco Secure ACS and
path is the path from the root of drive to the Cisco Secure ACS directory.
–
Take No Action—Leave Cisco Secure ACS operating as is.
• Generate event when an attempt is made to log in to a disabled
account—Specifies whether or not Cisco Secure ACS generates a Windows
event when a user attempts to login to your network using a disabled account.
Setting Up System Monitoring
To setup Cisco Secure ACS System Monitoring, follow these steps:
Step 1 In the navigation bar, click System Configuration.
Step 2 Click ACS Service Management.
Result: The ACS Active Service Management Setup page appears.
Step 3 To have Cisco Secure ACS test the login process, follow these steps:
a. Select the Test login process every X minutes check box.
b. Type the number of minutes that should pass between each login process test
in the X box.
c. From the on failure list, select the action Cisco Secure ACS should take when
the login test fails.
Step 4 To have Cisco Secure ACS generate a Windows event when a user attempts to
login to your network using a disabled account, select the Generate event when
an attempt is made to log in to a disabled account check box.