Filter
Top Products
3-15
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version. 3.0
Chapter 3 Setting Up the Cisco Secure ACS HTML Interface
Protocol Configuration Options for RADIUS
Note If the Per-user TACACS+/RADIUS Attributes check box on the Advanced
Options page of Interface Configuration is selected, a User check box appears
alongside the Group check box for each attribute.
To set protocol configuration options for RADIUS (Ascend) attributes, follow
these steps:
Step 1 Click Interface Configuration.
Step 2 Click RADIUS (Ascend).
Result: The Edit RADIUS (Ascend) page appears, listing extended attributes.
Step 3 For each RADIUS (Ascend) attribute that you want to appear as a configurable
option on the User Setup or Group Setup page, select the corresponding check
box.
Note Each attribute selected must be supported by your RADIUS network
devices.
Step 4 Click Submit at the bottom of the page.
Setting Protocol Configuration Options for RADIUS
(Cisco VPN 3000)
This procedure enables you to hide or display RADIUS (Cisco VPN 3000
Concentrator) attributes for configuration from other portions of the
Cisco Secure ACS HTML interface.
The RADIUS (Cisco VPN 3000 Concentrator) page lists all the attributes
available for Cisco VPN 3000 Concentrator RADIUS.
Note If the Per-user TACACS+/RADIUS Attributes check box on the Advanced
Options page of Interface Configuration is selected, a User check box appears
alongside the Group check box for each attribute.