Filter
Top Products
Chapter 7 Setting Up and Managing User Accounts
Basic User Setup Options
7-6
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Step 4 Ensure that the Account Disabled check box is not selected.
Note Alternatively, you can select the Account Disabled check box to
create a user account that is disabled, and enable the account at
another time.
Step 5 Under Password Authentication in the User Setup table, select the applicable
authentication type from the list.
Tip The authentication types that appear reflect the databases that you have
configured in the Database Configuration area of the External User Databases
section.
Step 6 Specify a single CiscoSecure PAP password by typing it in the first set of
Password and Confirm Password boxes.
Tip The CiscoSecure PAP password is also used for CHAP/MS-CHAP/ARAP if
the Separate CHAP/MS-CHAP/ARAP check box is not selected.
Tip You can configure the AAA client to ask for a PAP password first and then a
CHAP or MS-CHAP password so that when users dial in using a PAP
password, they will authenticate. For example, the following line in the AAA
client configuration file causes the AAA client to enable CHAP after PAP:
ppp authentication pap chap