Filter
Top Products
4-19
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Chapter 4 Setting Up and Managing Network Configuration
AAA Server Configuration
To edit a AAA server configuration, follow these steps:
Step 1 In the navigation bar, click Network Configuration.
Result: The Network Configuration section opens.
Step 2 Do one of the following:
a. If you are using NDGs, click the name of the NDG to which the AAA server
is assigned. Then, in the AAA Servers table, click the name of the AAA
server to be edited.
b. If you have not enabled NDGs, in the AAA Servers table, click the name of
the AAA server to be edited.
Result: The AAA Server Setup for X page appears.
Step 3 Enter or select new settings for one or more of the following fields:
• AAA Server IP Address
• Key
• Log Update/Watchdog Packets from this remote AAA Server
• AAA Server Type
• Traffic Type
Step 4 To save your changes and apply them immediately, click Submit + Restart.
Tip To save your changes and apply them later, click Submit. When you are ready
to implement the changes, click System Configuration, click Service
Control, and then click Restart.
Note Restarting the service clears the Logged-in User report and
temporarily interrupts all Cisco Secure ACS services. This affects the
Max Sessions counter and resets it to zero.