Filter
Top Products
Chapter 7 Setting Up and Managing User Accounts
Basic User Setup Options
7-22
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Step 2 Do one of the following:
a. Select the Never option to keep the user account always enabled.
Note This is the default setting.
b. Select the Disable account if option to disable the account under specific
circumstances. Then, specify one or both of the circumstances under the
following boxes:
• Date exceeds—Select the Date exceeds: check box. Then select the
month and type the date and year on which to disable the account.
Note The default is 30 days after the user is added.
• Failed attempts exceed—Select the Failed attempts exceed check box
and then type the number of consecutive unsuccessful login attempts to
allow before disabling the account.
Note The default is 5.
Step 3 Do one of the following:
a. If you are finished configuring the user account options, click Submit to
record the options.
b. To continue to specify the user account options, perform other procedures in
this chapter, as applicable.
Assigning a PIX ACL to a User
The Downloadable ACLs feature enables you to assign a PIX Access Control List
(ACL) at the user level. You must have established one or more PIX ACLs before
attempting to assign one. For instructions on how to configure a downloadable