Filter
Top Products
Chapter 8 Establishing Cisco Secure ACS System Configuration
CiscoSecure Database Replication
8-20
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Scheduling Replication
You can schedule when a primary Cisco Secure ACS server sends its replication
components to a secondary Cisco Secure ACS server. For more information about
replication scheduling options, see the “Configuring a Secondary
Cisco Secure ACS Server” section on page 8-17.
Note Replication cannot occur until the secondary Cisco Secure ACS servers are
configured properly. For more information about receiving replication
components, see the “Configuring a Secondary Cisco Secure ACS Server”
section on page 8-17.
To schedule when a primary Cisco Secure ACS server replicates to its secondary
Cisco Secure ACS servers, follow these steps:
Step 1 Log in to the primary Cisco Secure ACS server’s HTML interface.
Step 2 In the navigation bar, click System Configuration.
Step 3 Click CiscoSecure Database Replication.
Note If this feature does not appear, click Interface Configuration, click
Advanced Options, and select the CiscoSecure ACS Database
Replication check box. Also, verify that the Distributed System
Settings check box is selected; if not, select the Distributed System
Settings check box.
Result: The Database Replication Setup page appears.
Step 4 To specify which CiscoSecure database components the primary
Cisco Secure ACS server is to send to its secondary Cisco Secure ACS servers,
under Replication Components, select the corresponding Send check box for each
database component to be sent.
For more information about replication components, see the “Replication
Components Options” section on page 8-13.