Filter
Top Products
Chapter 6 Setting Up and Managing User Groups
Common User Group Settings
6-10
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
d. Complete the following boxes:
Note You must make an entry in each box. You can use the wildcard
asterisk (*) for all or part of a value. The format you use must
match the format of the string you receive from your AAA client.
You can determine this format from your RADIUS Accounting
Log.
• PORT—Type the number of the port to which to permit or deny access.
You can use the wildcard asterisk (*) to permit or deny access to all ports.
• CLI—Type the CLI number to which to permit or deny access. You can
use the wildcard asterisk (*) to permit or deny access based on part of the
number or all numbers.
Tip This is also the selection to use if you want to restrict access based on other
values, such as a Cisco Aironet client’s MAC address. For more information,
see the “About Network Access Restrictions” section on page 5-6.
• DNIS—Type the DNIS number to restrict access based on the number
into which the user will be dialing. You can use the wildcard asterisk (*)
to permit or deny access based on part of the number or all numbers.
Tip This is also the selection to use if you want to restrict access based on other
values, such as a Cisco Aironet AP’s MAC address. For more information, see
the “About Network Access Restrictions” section on page 5-6.
e. Click Enter.
Result: The information, specifying the AAA client, Port, CLI, and DNIS
appears in the list.