Filter
Top Products
9-27
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Chapter 9 Working with Logging and Reports
Working with ODBC Logs
Configuring an ODBC Log
The logs to which this procedure applies are:
• TACACS+ Accounting
• TACACS+ Administration
• RADIUS Accounting
• VoIP Accounting
• Failed Attempts
Note Before you can configure an ODBC log, you must prepare for ODBC logging.
For more information, see the “Preparing to Use ODBC Logging” section on
page 9-25.
To configure an ODBC log, follow these steps:
Step 1 In the navigation bar, click System Configuration.
Step 2 Click Logging.
Step 3 Click the name of the ODBC log you want to enable.
Result: The ODBC log Configuration page appears, where log is the name of the
ODBC log you selected.
The Select Columns To Log table contains two lists: Attributes and Logged
Attributes. When you first access the ODBC configuration page for a log, the
Logged Attributes list contains the default set of attributes. Cisco Secure ACS
includes in the log only those attributes that are in the Logged Attributes list.
Step 4 Specify the attributes that you want Cisco Secure ACS to send to the relational
database:
a. To add an attribute to the log, select the attribute in the Attributes list, and
then click —> (right arrow button).
Result: The attribute moves to the Logged Attributes list.
Tip Use the vertical scroll bar to find attributes not visible in the list box.