1068 IP Routing Commands
Syntax Description
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes, Config mode and all Config sub-modes
User Guidelines
The Method field contains one of the following values.
Example
console(config-if)#show ip interface
Default Gateway................................ 0.0.0.0
L3 MAC Address..........................
Routing Interfaces:
Interface State IP Address IP Mask Method
---------- ----- --------------- --------------- -------
Vl1 Down 0.0.0.0 0.0.0.0 None
The following examples display all IP information and information specific to
VLAN 2.
Parameter Description
type Interface type (loopback, out-of-band, or vlan)
number Interface number. Valid only for loopback and VLAN types.
Field Description
DHCP The address is leased from a DHCP server.
Manual The address is manually configured.
2CSPC4.X8100-SWUM102.book Page 1068 Friday, March 15, 2013 8:56 AM