Ethernet Configuration Commands 409
console (config-if)#
interface range
Use the interface range command in Global Configuration mode to execute a
command on multiple ports at the same time.
NOTE: An additional form of this command enables configuring a range of VLANs.
See interface range vlan.
Syntax
interface range {
port-rang
e |
port-type
all}
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration, Interface Range and Interface modes
User Guidelines
Commands under the interface range context are executed independently on
each active interface in the range. If the command returns an error on one of
the active interfaces, it does not stop executing commands on other active
interfaces.
Parameter Description
port-range
A list of valid ports to configure. Separate non-consecutive
ports with a comma and no spaces; use a hyphen to designate a
range of ports. For more detailed information, see
Operating on
Multiple Objects (Range)
. The command line buffer parses up
to the maximum number of command line characters possible
in the port-range parameter.
port-type Shows all interfaces of the specified type.
2CSPC4.X8100-SWUM102.book Page 409 Friday, March 15, 2013 8:56 AM