590 LLDP Commands
Extended POE PD
Required: 0.2 Watts
Source: local
Priority: low
show lldp remote-device
Use the lldp remote-device command in Privileged EXEC mode to display
the current LLDP remote data. This command can display summary
information or detail for each interface.
Syntax
show lldp remote-device {detail
interface
|
interface
| all}
• detail — Includes detailed version of remote data.
•
interface
— Specifies a valid physical interface on the device. Substitute
gigabitethernet
unit/slot/port
or tengigabitethernet
unit/slot/port
or
fortygigabitethernet
unit/slot/port
}
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Examples
These examples show current LLDP remote data, including a detailed
version.
console#show lldp remote-device
Local Remote
2CSPC4.X8100-SWUM102.book Page 590 Friday, March 15, 2013 8:56 AM