DHCP Layer 2 Relay Commands 343
VLAN Id L2 Relay CircuitId RemoteId
--------- ---------- ----------- ------------
3 Disabled Enabled --NULL--
5 Enabled Enabled --NULL--
6 Enabled Enabled broadcom
7 Enabled Disabled --NULL--
8 Enabled Disabled --NULL--
9 Enabled Disabled --NULL--
10 Enabled Disabled --NULL--
show dhcp l2relay interface
Use the show dhcp l2relay interface command in Privileged EXEC mode to
display DHCP L2 Relay configuration specific to interfaces.
Syntax
show dhcp l2relay interface {all |
interface-id
}
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command.
Parameter Description
all Show all interfaces.
interface-id A physical interface.
2CSPC4.X8100-SWUM102.book Page 343 Friday, March 15, 2013 8:56 AM