1484 Configuration and Image File Commands
boot system
Use the boot system command in Privileged EXEC mode to specify the
system image that the device loads at startup.
Syntax
boot system [unit-id][image1|image2][active|backup]
Parameter Description
The image1 and image2 keywords are deprecated on the PC81xx only.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
delete backup-config show running-config
delete backup-image show startup-config
delete startup-config update bootcode
dir write
erase
–
Parameter Description
image1 Marks the given image as active for subsequent reboots.
image2 Marks the given image as active for subsequent reboots.
unit Unit to be used for this operation. If absent, command executes
on this node.
active Boot from the currently active image. (PC81xx only)
backup Boot from the backup image. (PC81xx only)
2CSPC4.X8100-SWUM102.book Page 1484 Friday, March 15, 2013 8:56 AM