Multicast Commands 1165
Syntax
show ip mcast mroute static [
sourceipaddr
]
•
sourceipaddr
— IP address of source.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays the static routes configured in the static
mcast table.
console#show ip mcast mroute static
MULTICAST STATIC ROUTES
Source IP Source Mask RPF Address Preference
--------------- --------------- --------------- ----------
1.1.1.1 255.255.255.0 2.2.2.2 23
show ip pim
The show ip pim command displays information about the interfaces
enabled for PIM.
Syntax
show ip pim
Default Configuration
There is no default configuration for this command.
2CSPC4.X8100-SWUM102.book Page 1165 Friday, March 15, 2013 8:56 AM