426 Ethernet Configuration Commands
EAPOL Frames Transmitted....................... 0
EAPOL Start Frames Received.................... 0
Time Since Counters Last Cleared............... 0 day 13 hr
20 min 24 sec
show statistics switchport
Use the show statistics command in Privileged EXEC mode to display
detailed statistics for a specific port or for the entire switch.
Syntax
show statistics {
interface-id
|switchport}
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
It is possible to enter interface configuration mode from global configuration
mode or from interface configuration mode.
Example
The following example shows statistics for the entire switch.
Parameter Description
interface-id Interface id. See
Interface Naming Conventions
for interface
representation.
switchport Displays statistics for the entire switch.
2CSPC4.X8100-SWUM102.book Page 426 Friday, March 15, 2013 8:56 AM