Filter
Top Products
704 RADIUS Commands
Default Configuration
IEEE 802.1x accounting is not enabled by default.
Command Mode
Global Configuration mode
User Guidelines
Accounting records, when enabled for a line mode, are sent at both the
beginning and at the end (start-stop) of command execution or only at the
end (stop-only) of command execution. If none is specified, then accounting
is disabled for RADIUS. If radius is the specified accounting method,
accounting records are forwarded to the list of RADIUS servers.
For the same set of accounting type and list name, the administrator can
change the record type, or the methods list, without having to first delete the
previous configuration.
A maximum of five accounting method lists can be created for each exec and
commands accounting type.
start-stop Issue a start accounting notice at the beginning and stop
accounting notice at the end of the accounted method.
Accounting notices are sent when the user logs into the switch
and when the user logs out of the exec mode. Accounting
notifications are also sent at the beginning and at the end of the
user executed command. Command execution does not wait
for the accounting notification to be recorded at the AAA
server.
stop-only An accounting notice is sent when the user logs out of the exec
mode. The duration of the exec session is mentioned in the
accounting notice. Accounting notifications are sent at the end
of each user executed command. In the case of commands like
reload
, and
clear config
, an exception is made and the stop
accounting notice is sent at the beginning of the command.
radius Issue accounting records to the defined RADIUS servers.
tacacs Issue accounting records to the defined TACACS servers.
Parameter Description
2CSPC4.X8100-SWUM102.book Page 704 Friday, March 15, 2013 8:56 AM