Filter
Top Products
Command Groups 78
Administrative Profiles
Configures and displays ACL information.
Address Table
Configures bridging address tables.
Auto-VoIP
Configures Auto VoIP for IP phones on a switch.
CDP Interoperability
Configures Cisco
®
Discovery Protocol (CDP).
DHCP L2 Relay
Enables the Layer 2 DHCP Relay agent for an interface.
DHCP Management
Interface
Configures DHCP snooping and whether an interface is
trusted for filtering.
Dynamic ARP Inspection
Configures for rejection of invalid and malicious ARP
packets.
Ethernet Configuration
Configures all port configuration options for example
ports, storm control, port speed and auto-negotiation.
Ethernet CFM
Configures and displays GVRP configuration and
information.
IGMP Snooping
Configures IGMP snooping and displays IGMP
configuration and IGMP information.
IGMP Snooping Querier
Configures IGMP Snooping Querier and displays IGMP
Snooping Querier information.
IP Addressing
Configures and manages IP addresses on the switch.
IPv6 ACL
Configures and displays ACL information for IPv6.
IPv6 MLD Snooping
Configures IPv6 MLD Snooping.
IPv6 MLD Snooping
Querier
Configures IPv6 Snooping Querier and displays IPv6
Snooping Querier information.
iSCSI Optimization
Configures special QoS treatment for traffic between
iSCSI initiators and target systems.
Link Dependency
Configures and displays link dependency information.
LLDP
Configures and displays LLDP information.
Port Channel
Configures and displays Port channel information.
Port Monitor
Monitors activity on specific target ports.
QoS
Configures and displays QoS information.
Table 1-1. System Command Groups
(continued)
Command Group Description
2CSPC4.X8100-SWUM102.book Page 78 Friday, March 15, 2013 8:56 AM