Command Groups 156
SDM Templates
Serviceability Tracing
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see
Mode Types
on page 81.
sdm prefer
Changes the template that will be active after
the next reboot.
GC
show sdm prefer
Views the currently active SDM template and
its scaling parameters, or views the scaling
parameters for an inactive template.
PE
Command Description Mode
a
debug arp
Enables tracing of ARP packets. PE
debug auto-voip
Enables Auto VOIP debug messages. PE
debug clear
Disables all debug traces. PE
debug console
Enables the display of debug trace output on
the login session in which it is executed.
PE
debug dot1x
Enables dot1x packet tracing. PE
debug igmpsnooping
Enables tracing of IGMP Snooping packets
transmitted and/or received by the switch.
PE
debug ip acl
Enables debug of IP Protocol packets matching
the ACL criteria.
PE
debug ip dvmrp
Traces DVMRP packet reception and
transmission.
PE
debug ip igmp
Traces IGMP packet reception and
transmission.
PE
debug ip mcache
Traces MDATA packet reception and
transmission.
PE
debug ip pimdm packet
Traces PIMDM packet reception and
transmission.
PE
debug ip pimsm packet
Traces PIMSM packet reception and
transmission.
PE
debug ip vrrp
Enables VRRP debug protocol messages. PE
2CSPC4.X8100-SWUM102.book Page 156 Friday, March 15, 2013 8:56 AM