Command Groups 143
Tunnel Interface
enable
Resets the default administrative mode of RIP
in the router (active).
RIP
hostroutesaccept
Enables the RIP hostroutesaccept mode. RIP
ip rip
Enables RIP on a router interface. IC
ip rip authentication
Sets the RIP Version 2 Authentication Type and
Key for the specified interface.
IC
ip rip receive version
Configures the interface to allow RIP control
packets of the specified version(s) to be
received.
IC
ip rip send version
Configures the interface to allow RIP control
packets of the specified version to be sent.
IC
redistribute
Configures OSPF protocol to allow
redistribution of routes from the specified
source protocol/routers.
PIP
router rip
Enters Router RIP mode. GC
show ip rip
Displays information relevant to the RIP router. PE
show ip rip interface
Displays information related to a particular RIP
interface.
PE
show ip rip interface brief
Displays general information for each RIP
interface.
PE
split-horizon
Sets the RIP split horizon mode. RIP
a. For the meaning of each Mode abbreviation, see
Mode Types
on page 81.
Command Description Mode
a
interface tunnel
Enables the interface configuration mode for a
tunnel.
GC
show interfaces tunnel
Displays the parameters related to tunnel such
as tunnel mode, tunnel source address and
tunnel destination address.
PE
tunnel destination
Specifies the destination transport address of
the tunnel.
IC
Command Description Mode
a
2CSPC4.X8100-SWUM102.book Page 143 Friday, March 15, 2013 8:56 AM