IGMP Snooping Querier Commands 485
Syntax
ip igmp snooping querier timer expiry
seconds
no ip igmp snooping querier timer expiry
•
seconds
— The time in seconds that the switch remains in Non-Querier
mode after it has discovered that there is a multicast querier in the
network. The range is 60–300 seconds.
Default Configuration
The query interval default is 60 seconds.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the querier timer expiry time to 100 seconds.
console(config)#ip igmp snooping querier timer expiry 100
ip igmp snooping querier version
This command sets the IGMP version of the query that the snooping switch
is going to send periodically. The no form of this command sets the IGMP
Querier Version to its default value.
Syntax
ip igmp snooping querier version
version
no ip igmp snooping querier version
•
version
— IGMP version. (Range: 1–2)
Default Configuration
The querier version default is 2.
2CSPC4.X8100-SWUM102.book Page 485 Friday, March 15, 2013 8:56 AM