QoS Commands 683
------------- ---------------
01
11
26
34
43
54
65
76
The following table lists the parameters in the example and gives a
description of each.
show classofservice ip-dscp-mapping
Use the show classofservice ip-dscp-mapping command in Privileged EXEC
mode to display the current IP DSCP mapping to internal traffic classes for a
specific interface.
Syntax
show classofservice ip-dscp-mapping
• Command is supported only globally.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
Parameter Description
User Priority The 802.1p user priority value.
Traffic Class The traffic class internal queue identifier to which
the user priority value is mapped.
2CSPC4.X8100-SWUM102.book Page 683 Friday, March 15, 2013 8:56 AM