Data Center Bridging Commands 889
Enhanced Transmission Selection (ETS)
Commands
NOTE: Enhanced Transmission Selection commands are only supported on PC81xx series
switches. CLI commands and Dell OpenManage Switch Administrator pages are
not available for other switch models.
classofservice traffic-class-group
This command maps the internal Traffic Class to an internal Traffic Class
Group (TCG). The Traffic Class can range from 0-6, although the actual
number of available traffic classes depends on the platform.
Use the no form of this command to return system (Global Config mode) or
interface (Interface Config mode) to the default mapping.
Syntax
classofservice traffic-class-group <trafficclass> <traffic class group>
no classofservice traffic-class-group
Parameter Description
Default Configuration
By default, all the traffic classes are mapped to TCG 0. In the default
configuration, all the Traffic Classes are grouped as one Traffic Class Group
and TCG0 is configured as weighted round robin.
Command Mode
Global Config, Interface Config modes
Parameter Description
trafficclass The selected traffic class. Range is 0-6.
trafficclassgroup The selected group. Range 0-2.
2CSPC4.X8100-SWUM102.book Page 889 Friday, March 15, 2013 8:56 AM