OSPFv3 Commands 1345
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays the OSPF stub table.
console(config)#show ipv6 ospf virtual-link brief
Hello Dead Retransmit Transit
Area ID Neighbor Interval Interval Interval Delay
----------- ----------- ---------- ---------- ---------- --------
2CSPC4.X8100-SWUM102.book Page 1345 Friday, March 15, 2013 8:56 AM