Address Table Commands 309
show mac address-table address
Use the show mac address-table address command in User EXEC or
Privileged EXEC mode to display all entries in the bridge-forwarding database
for the specified MAC address.
Syntax
show mac address-table address
mac-address
[interface
interface-id
] [vlan
vlan-id
]
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
In this example, the mac address table entry for 0000.E26D.2C2A is
displayed.
console#show mac address-table address 0000.E26D.2C2A
Vlan Mac Address Type Port
Parameter Description
mac-address A MAC address with the format xxxx.xxxx.xxxx.
interface-id Display information for a specific interface. Valid interfaces
include physical ports and port channels.
vlan-id Display entries for the specific VLAN only. The range is 1 to
4093.
2CSPC4.X8100-SWUM102.book Page 309 Friday, March 15, 2013 8:56 AM