Ethernet Configuration Commands 423
show statistics
Use the show statistics command in Privileged EXEC mode to display
detailed statistics for a specific port or for the entire switch.
Syntax
show statistics {gigabitethernet unit/slot/port |switchport |
port-channel
port-channel-number
| tengigabitethernet unit/slot/port
|
fortygigabitethernet
unit/slot/port}
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Examples
The following example shows statistics for port 1/0/1.
console(config-if-Te1/0/1)#show statistics te1/0/1
Total Packets Received (Octets)................ 0
Packets Received 64 Octets..................... 0
Packets Received 65-127 Octets................. 0
Packets Received 128-255 Octets................ 0
Parameter Description
unit/slot/port
A valid interface. See
Interface Naming Conventions
for
interface representation.
switchport Displays statistics for the entire switch.
2CSPC4.X8100-SWUM102.book Page 423 Friday, March 15, 2013 8:56 AM