Filter
Top Products
Command Groups 93
Ethernet CFM
show interfaces status
Displays the status for all configured interfaces. UE
show statistics
Displays statistics for one port or for the entire
switch.
PE
show statistics switchport
Displays detailed statistics for a specific port or
for the entire switch.
PE
show storm-control
Displays the storm control configuration. PE
shutdown
Disables interfaces. IC
speed
Configures the speed of a given Ethernet
interface when not using auto-negotiation.
IC
storm-control broadcast
Enables Broadcast storm control. IC
storm-control multicast
Enables the switch to count Multicast packets
together with Broadcast packets.
IC
storm-control unicast
Enables Unicast storm control. IC
switchport protected
Sets the port to Protected mode. IC
switchport protected name
Configures a name for a protected group. GC
show switchport protected
Displays protected group/port information. PE
a. For the meaning of each Mode abbreviation, see
Mode Types
on page 81.
Command Description Mode
a
ethernet cfm domain
Enters into maintenance domain config mode
for an existing domain. Use the optional level
parameter to create a domain and enter into
maintenance domain config mode.
GC
service
Associates a VLAN with a maintenance domain. MDC
ethernet cfm cc level
Initiates sending continuity checks (CCMs) at
the specified interval and level on a VLAN
monitored by an existing domain.
GC
ethernet cfm mep level
Creates a Maintenance End Point (MEP) on an
interface at the specified level and direction.
IC
Command Description Mode
a
2CSPC4.X8100-SWUM102.book Page 93 Friday, March 15, 2013 8:56 AM