472 IGMP Snooping Commands
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode, Config mode and all Config sub-modes
User Guidelines
To see the full Multicast address table (including static addresses) use the
show mac address-table
command.
Example
The example shows Multicast groups learned by IGMP snooping for all
VLANs.
console>show ip igmp snooping groups
Vlan IP Address Ports
---- ----------- -------
1 224-239.130 | 2.2.3 1/0/1, 2/0/2
19 224-239.130 | 2.2.8 1/0/9-1/0/11
IGMP Reporters that are forbidden statically:
---------------------------------------------
Vlan IP Address Ports
---- ------------------ -------------------
1 224-239.130 | 2.2.3 1/0/19
show ip igmp snooping mrouter
Use the show ip igmp snooping mrouter command in Privileged EXEC mode
to display information on dynamically learned Multicast router interfaces.
2CSPC4.X8100-SWUM102.book Page 472 Friday, March 15, 2013 8:56 AM