980 DHCP Server and Relay Agent Commands
show ip dhcp conflict
Use the show ip dhcp conflict command in User EXEC mode to display
DHCP address conflicts for all relevant interfaces or a specified interface. If
an interface is specified, the optional statistics parameter is available to view
statistics for the specified interface.
Syntax
show ip dhcp conflict [
address
]
Parameter Description
Default Configuration
The command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
show ip dhcp global configuration
Use the show ip dhcp global configuration command in Privileged EXEC
mode to display the DHCP global configuration.
Syntax
show ip dhcp server statistics
Parameter Description
This command does not require a parameter description.
Parameter Description
address A valid IPv4 address for which the conflict information is
desired.
2CSPC4.X8100-SWUM102.book Page 980 Friday, March 15, 2013 8:56 AM