1624 SNMP Commands
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following examples display the configuration of views with and without a
view name specified.
show trapflags
Use the show trapflags command in Privileged EXEC mode to display the
trap settings.
Syntax
show trapflags [ospf|ospfv3|captive-portal]
Parameter Description
console# show snmp views
Name OID Tree Type
----------- ----------------------- ---------
user-view1 1.3.6.1.2.1.1 Included
user-view1 1.3.6.1.2.1.1.7 Excluded
user-view2 1.3.6.1.2.1.2.2.1.*.1 Included
Parameter Description
ospf Display OSPFv2 specific trap settings.
ospfv3 Display OSPFv3 specific trap settings.
captive-portal Display captive-portal specific trap settings.
2CSPC4.X8100-SWUM102.book Page 1624 Friday, March 15, 2013 8:56 AM