Virtual Router Redundancy Protocol Commands 1399
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays all configuration information about the
virtual router on the selected interface.
console#show vrrp interface brief
Interface VRID IP Address Mode State
--------- ---- -------------- ------ ------------
vlan1 2 0.0.0.0 Disable Initialize
vlan2 5 192.168.5.55 Enable Initialize
show vrrp interface stats
Use the show vrrp interface stats command in User EXEC mode to display
the statistical information about each virtual router configured on the switch.
Syntax
show vrrp interface stats vlan
vlan-id vr-id
•
vlan-id
— Valid VLAN ID.
•
vr-id
— The virtual router identifier. (Range: 1-255)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
2CSPC4.X8100-SWUM102.book Page 1399 Friday, March 15, 2013 8:56 AM