706 RADIUS Commands
User Guidelines
When enabling accounting for exec mode for the current line-configuration
type, users logged in with that mode will be logged out.
Examples
Use the following command to enable exec type accounting for telnet.
console(config)#line telnet
console(config-telnet)# accounting exec default
acct-port
Use the acct-port command to set the port that connects to the RADIUS
accounting server. Use the no form of this command to reset the port to the
default.
Syntax
acct-port
port
no acct-port
•
port
— The layer 4 port number of the accounting server (Range: 1 -
65535).
Default Configuration
The default value of the port number is 1813.
Command Mode
Radius (accounting) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets port number 56 for accounting requests.
console(config)#radius-server host acct 3.2.3.2
2CSPC4.X8100-SWUM102.book Page 706 Friday, March 15, 2013 8:56 AM