1618 SNMP Commands
Syntax
show snmp
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays the SNMP communications status.
Console # show snmp
Community-String Community-Access View name IP address
---------------- ---------------- ---------- ----------
public read only user-view All
private read write Default 172.16.1.1
private su DefaultSuper 172.17.1.1
Community-String Group name IP address
---------------- --------- ----------
public user-group All
Traps are enabled.
Authentication trap is enabled.
Version 1,2 notifications
Target Address Type Community Version UDP Filter TO Retries
Port name Sec
-------------- ------ --------- ------- ---- ------ --- -----
192.122.173.42 Trap public 2 162 filt1 15 3
192.122.173.42 Inform public 2 162 filt2 15 3
2CSPC4.X8100-SWUM102.book Page 1618 Friday, March 15, 2013 8:56 AM