1408 Auto-Install Commands
boot host autoreboot
Use the boot host autoreboot command in Global Configuration mode to
enable rebooting the device (no administrative intervention) when the auto-
image is successfully downloaded. Use the no form of this command to
disable rebooting the device (no administrative intervention) when the auto-
image is successfully downloaded.
Syntax
boot host autoreboot
no boot host autoreboot
Parameter Description
This command does not require a parameter description.
Default Configuration
The default value is enabled.
Command Mode
Global Configuration mode
User Guidelines
The configuration on the master switch controls the stack as if it is a single
switch. No configuration steps need to be taken on the member switches to
enable rebooting the member switches after auto-image download.
Example
console#
console#configure
console(config)#boot host autoreboot
console(config)#no boot host autoreboot
2CSPC4.X8100-SWUM102.book Page 1408 Friday, March 15, 2013 8:56 AM