300 Address Table Commands
Commands in this Chapter
This chapter explains the following commands:
clear mac address-table
Use the clear mac address-table command in Privileged EXEC mode to
remove learned entries from the forwarding database.
Syntax
clear mac address-table dynamic [address
mac-addr
| interface
interface-id
|
vlan
vlan-id
]
Parameter Description
clear mac address-table show mac address-table
multicast
show mac address-table
interface
mac address-table aging-
time
show mac address-table show mac address-table
static
mac address-table multicast
forbidden address
show mac address-table
address
show mac address-table vlan
mac address-table static
vlan
show mac address-table
count
show ports security
port security show mac address-table
count
show ports security
addresses
port security max show mac address-table
dynamic
<Variable>–
Parameter Description
mac-addr
Delete the specified MAC address.
interface-id
Delete all dynamic MAC addresses on the specified physical
port or port channel.
vlan-id
Delete all dynamic MAC addresses for the specified VLAN. The
range is 1 to 4093.
2CSPC4.X8100-SWUM102.book Page 300 Friday, March 15, 2013 8:56 AM