Filter
Top Products
418 Ethernet Configuration Commands
show interfaces description
Use the show interfaces description command in User EXEC mode to
display the description for all configured interfaces.
Syntax
show interfaces description [gigabitethernet unit/slot/port |
port-channel
port-channel-number
| tengigabitethernet unit/slot/port
|
fortygigabitethernet
unit/slot/port]
FCS Errors Counted frames received that are an integral number of
octets in length but do not pass the FCS check.
Single Collision Frames Counted frames that are involved in a single collision, and
are subsequently transmitted successfully.
Multiple Collision
Frames
A count of frames that are involved in a multiple collision,
and are subsequently transmitted successfully
Deferred
Tra nsmis sio ns
A count of frames for which the first transmission attempt
is delayed because the medium is busy
Late Collisions Counted times that a collision is detected later than one
slot time into the transmission of a packet.
Excessive Collisions Counted frames for which transmission fails due to
excessive collisions.
Oversize Packets Counted frames received that exceed the maximum
permitted frame size.
Internal MAC Rx Errors A count of frames for which reception fails due to an
internal MAC sublayer receive error.
Received Pause Frames A count of MAC Control frames received with an opcode
indicating the PAUSE operation.
Transmitted Pause
Frames
Counted MAC Control frames transmitted on this
interface with an opcode indicating the PAUSE operation.
Received PFC Frames A count of the received Priority Flow Control (PFC)
frames.
Transmitted PFC
Frames
A count of the transmitted PFC frames.
Field Description
2CSPC4.X8100-SWUM102.book Page 418 Friday, March 15, 2013 8:56 AM