System Management Commands 1697
Example
The following example displays how to add to stack switch number 2 with
index 1.
console(config)# stack
console(config-stack)# member 2 1
motd-banner
Use the motd-banner command to enable motd on the console, telnet or
SSH connection. To disable, use the no form of the command.
Syntax
motd-banner
no motd-banner
•
MESSAGE
— Quoted text
Default Configuration
This command has no default configuration.
Command Mode
Line Configuration
User Guidelines
This command has no user guidelines.
Example
console(config-telnet)# motd-banner
nsf
Use this command to enable non-stop forwarding. The no form of the
command will disable NSF.
2CSPC4.X8100-SWUM102.book Page 1697 Friday, March 15, 2013 8:56 AM