Filter
Top Products
140 | Dell SonicWALL WXA 1.3 User’s Guide
System Status Tab
Name Description
System Information Panel
(Read-only) Displays the following information:
• Model Number
• Serial Number
• Firmware Version.
Time Settings Panel Configure the time synchronization source , refresh the UTC time, or
view the local time on client. It is recommended to synchronize the time
between the WXA series appliance and the domain controller. However,
you can configure an NTP server to synchronize time with the WXA
series appliance if WFS Acceleration (Signed SMB) is not required. NTP
servers issue time as UTC, and time zones do not affect the time
received by the NTP servers.
System Statistics Panel
(Read-only) Displays the following information:
• Load
• Uptime
• Number of processes
RAID Panel Indicates the RAID status (for the WXA 4000 only). A green circle indi-
cates the RAID is ok. A red circle indicates the RAID is inoperable,
unknown, or degraded. A yellow circle indicates the RAID is recovering,
initializing, initializing-paused, verifying, verifying-paused, rebuilding, or
rebuilding-paused.
Refresh Button Refreshes the System Status tab. The refresh interval can be entered in
the box to the right of the Refresh symbol. The interval can be increased
to a maximum of 999 seconds.
Click the Refresh button to manually update the System Status tab.
Click the Pause button to stop updates on the page.
Diagnostics Report Button Downloads a diagnostics report file. This file can be sent to Technical
Support and reviewed for diagnostic help.
Power Off Button Shuts down the WXA series appliance.
Reboot Button Reboots the WXA series appliance.
Set Time Button Resets the time on the appliance. If using a time synchronization source
(domain controller or NTP server) it will overwrite the time set manually.